CCNA 3 Chapter 2
1.
What type of connection point is a point of presence (POP)?
a. between a client and a host
b. between two local networks
c. between a computer and a switch
d. between an ISP and an Enterprise network ****
2.
A network administrator needs to configure Telnet access to a router. Which group of commands
enable Telnet access to the router?
a. Router(config)# enable password class
Router(config)# line con 0
Router(config-line)# login
Router(config-line)# password cisco
b. Router(config)# ip host 192.168.1.1 NewYork
Router(config)# enable password cisco
c. Router(config)# line aux 0
Router(config-line)# login
Router(config-line)# password cisco
d. Router(config)# enable password class ****
Router(config)# line vty 0 4
Router(config-line)# login
Router(config-line)# password cisco
3.
Which two types of information should be included in a business continuity plan? (Choose two.)
a. maintenance time periods
b. intrusion monitoring records
c. offsite data storage procedures
d. alternate IT processing locations *****
e. problem resolution escalation steps ****
4. Which two router parameters can be set from interface configuration mode? (Choose two.)
a. IP address ****
b. Telnet password
c. hostname
d. console password
e. subnet mask ****
f. enable secret password
5.
Which two devices protect a corporate network against malicious attacks at the enterprise edge ?(Choose two.)
a. demarc
b. IP security (IPSec)
c. Data Service Unit (DSU)
d. intrusion prevention system (IPS) ****
e. intrusion detection system (IDS) ****
6.
Which three steps must be performed to remove all VLAN information from a switch but retain the
rest of the configuration? (Choose three.)
a. Remove all VLAN associations from the interfaces.
b. Remove the 802.1q encapsulation from the interface.
c. Issue the command copy start run.
d. Issue the command delete flash:vlan.dat. ****
e. Issue the command erase start. ****
f. Reload the switch. ****
7.
What is the demarcation?
a. physical point where the ISP responsibilty ends and the customer responsibilty begins ****
b. physical location where all server farm connections meet before being distributed into the Core
c. point of entry for outside attacks and is often vulnerable
d. point of entry for all Access Layer connections from the Distribution Layer devices
8.
Which device is responsible for moving packets between multiple network segments?
a. router ****
b. switch
c. CSU/DSU
d. IDS device
10.
What information can an administrator learn using the show version command?
a. Cisco IOS filename ****
b. configured routing protocol
c. status of each interface
d. IP addresses of all interfaces
11.
Which two situations require a network administrator to use out-of-band management to change a
router configuration? (Choose two.)
a. Network links to the router are down. ****
b. No Telnet password has been configured on the router.
c. The administrator can only connect to the router using SSH.
d. The network interfaces of the router are not configured with IP addresses. ****
e. Company security policy requires that only HTTPS be used to connect to routers.
12.
It is crucial that network administrators be able to examine and configure network devices from
their homes. Which two approaches allow this connectivity without increasing vulnerability to external
attacks? (Choose two.)
a. Configure a special link at the POP to allow external entry from the home computer.
b. Set up VPN access between the home computer and the network. ****
c. Install a cable modem in the home to link to the network.
d. Configure ACLs on the edge routers that allow only authorized users to access management ports
on network devices. ****
e. Configure a server in the DMZ with a special username and password to allow external access.
13.
A network administrator must define specific business processes to implement if a catastrophic
disaster prevents a company from performing daily business routines. Which portion of the network
documentation is the administrator defining?
a. business security plan
b. business continuity plan ****
c. network solvency plan
d. service level agreement
e. network maintenance plan
14.
A DoS attack crippled the daily operations of a large company for 8 hours. Which two options
could be implemented by the network administrator to possibly prevent such an attack in the future?
(Choose two.)
a. install security devices with IDS and IPS at the enterprise edge ****
b. reset all user passwords every 30 days
c. filter packets based on IP address, traffic pattern, and protocol ****
d. deny external workers VPN access to internal resources
e. ensure critical devices are physically secure and placed behind the demarc
15.
A network manager wants to have processes in place to ensure that network upgrades do not affect
business operations. What will the network manager create for this purpose?
a. business security plan
b. business continuity plan
c. service level agreement
d. network maintenance plan ****
16.
An investment company has multiple servers that hold mission critical data. They are worried that if
something happens to these servers, they will lose this valuable information. Which type of plan is
needed for this company to help minimize loss in the event of a server crash?
a. business security ****
b. business continuity
c. network maintenance
d. service level agreement
17.
When searching for information about authentication methods and usernames of company
personnel, where can a network administrator look?
a. Business Continuity Plan
b. Business Security Plan ****
c. Network Maintenance Plan
d. Service Level Agreement
18.
Refer to the exhibit. Which statement is true about port Fa5/1?
a. When a violation is detected, the port will log the information to a syslog server.
b. When a violation is detected, the port will go into err-disable mode.
c. There have been 11 security violations since the last reload.
d. The port is currently in the shutdown state. ****
What type of connection point is a point of presence (POP)?
a. between a client and a host
b. between two local networks
c. between a computer and a switch
d. between an ISP and an Enterprise network ****
2.
A network administrator needs to configure Telnet access to a router. Which group of commands
enable Telnet access to the router?
a. Router(config)# enable password class
Router(config)# line con 0
Router(config-line)# login
Router(config-line)# password cisco
b. Router(config)# ip host 192.168.1.1 NewYork
Router(config)# enable password cisco
c. Router(config)# line aux 0
Router(config-line)# login
Router(config-line)# password cisco
d. Router(config)# enable password class ****
Router(config)# line vty 0 4
Router(config-line)# login
Router(config-line)# password cisco
3.
Which two types of information should be included in a business continuity plan? (Choose two.)
a. maintenance time periods
b. intrusion monitoring records
c. offsite data storage procedures
d. alternate IT processing locations *****
e. problem resolution escalation steps ****
4. Which two router parameters can be set from interface configuration mode? (Choose two.)
a. IP address ****
b. Telnet password
c. hostname
d. console password
e. subnet mask ****
f. enable secret password
5.
Which two devices protect a corporate network against malicious attacks at the enterprise edge ?(Choose two.)
a. demarc
b. IP security (IPSec)
c. Data Service Unit (DSU)
d. intrusion prevention system (IPS) ****
e. intrusion detection system (IDS) ****
6.
Which three steps must be performed to remove all VLAN information from a switch but retain the
rest of the configuration? (Choose three.)
a. Remove all VLAN associations from the interfaces.
b. Remove the 802.1q encapsulation from the interface.
c. Issue the command copy start run.
d. Issue the command delete flash:vlan.dat. ****
e. Issue the command erase start. ****
f. Reload the switch. ****
7.
What is the demarcation?
a. physical point where the ISP responsibilty ends and the customer responsibilty begins ****
b. physical location where all server farm connections meet before being distributed into the Core
c. point of entry for outside attacks and is often vulnerable
d. point of entry for all Access Layer connections from the Distribution Layer devices
8.
Which device is responsible for moving packets between multiple network segments?
a. router ****
b. switch
c. CSU/DSU
d. IDS device
10.
What information can an administrator learn using the show version command?
a. Cisco IOS filename ****
b. configured routing protocol
c. status of each interface
d. IP addresses of all interfaces
11.
Which two situations require a network administrator to use out-of-band management to change a
router configuration? (Choose two.)
a. Network links to the router are down. ****
b. No Telnet password has been configured on the router.
c. The administrator can only connect to the router using SSH.
d. The network interfaces of the router are not configured with IP addresses. ****
e. Company security policy requires that only HTTPS be used to connect to routers.
12.
It is crucial that network administrators be able to examine and configure network devices from
their homes. Which two approaches allow this connectivity without increasing vulnerability to external
attacks? (Choose two.)
a. Configure a special link at the POP to allow external entry from the home computer.
b. Set up VPN access between the home computer and the network. ****
c. Install a cable modem in the home to link to the network.
d. Configure ACLs on the edge routers that allow only authorized users to access management ports
on network devices. ****
e. Configure a server in the DMZ with a special username and password to allow external access.
13.
A network administrator must define specific business processes to implement if a catastrophic
disaster prevents a company from performing daily business routines. Which portion of the network
documentation is the administrator defining?
a. business security plan
b. business continuity plan ****
c. network solvency plan
d. service level agreement
e. network maintenance plan
14.
A DoS attack crippled the daily operations of a large company for 8 hours. Which two options
could be implemented by the network administrator to possibly prevent such an attack in the future?
(Choose two.)
a. install security devices with IDS and IPS at the enterprise edge ****
b. reset all user passwords every 30 days
c. filter packets based on IP address, traffic pattern, and protocol ****
d. deny external workers VPN access to internal resources
e. ensure critical devices are physically secure and placed behind the demarc
15.
A network manager wants to have processes in place to ensure that network upgrades do not affect
business operations. What will the network manager create for this purpose?
a. business security plan
b. business continuity plan
c. service level agreement
d. network maintenance plan ****
16.
An investment company has multiple servers that hold mission critical data. They are worried that if
something happens to these servers, they will lose this valuable information. Which type of plan is
needed for this company to help minimize loss in the event of a server crash?
a. business security ****
b. business continuity
c. network maintenance
d. service level agreement
17.
When searching for information about authentication methods and usernames of company
personnel, where can a network administrator look?
a. Business Continuity Plan
b. Business Security Plan ****
c. Network Maintenance Plan
d. Service Level Agreement
18.
Refer to the exhibit. Which statement is true about port Fa5/1?
a. When a violation is detected, the port will log the information to a syslog server.
b. When a violation is detected, the port will go into err-disable mode.
c. There have been 11 security violations since the last reload.
d. The port is currently in the shutdown state. ****
0 Response to "CCNA 3 Chapter 2"
Post a Comment