10
QUESTION 81
The ip subnet zero command is not configured on a router. What would be the IP address of Ethernet0/0 using the first available address from the sixth subnet of the network 192.168.8.0/29?
A. | 192.168.8.25 |
B. | 192.168.8.41 |
C. | 192.168.8.49 |
D. | 192.168.8.113 |
Answer: C
Section: Chapter 3: IP Addressing and VLSM
Explanation/Reference:
QUESTION 82
For the network 192.0.2.0/23, which option is a valid IP address that can be assigned to a host?
A. | 192.0.2.0 |
B. | 192.0.2.255 |
C. | 192.0.3.255 |
D. | 192.0.4.0 |
Answer: B
Section: Chapter 3: IP Addressing and VLSM
Explanation/Reference:
QUESTION 83
How many addresses for hosts will the network 124.12.4.0/22 provide?
A. | 510 |
B. | 1022 |
C. | 1024 |
D. | 2048 |
Answer: B
Section: Chapter 3: IP Addressing and VLSM
Explanation/Reference:
QUESTION 84
Where does routing occur within the DoD TCP/IP reference model?
A. application
B. internet C. network D. transport
Answer: B
Section: Chapter 2: TCP/IP
Explanation/Reference:
QUESTION 85
Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the
VTP domain?
A. client
B. dynamic
C. server
D. static
E. transparent
Answer: E
Section: Chapter 10: VLAN
Explanation/Reference:
QUESTION 86
Which switch would STP choose to become the root bridge in the selection process?
A. 32768: 11-22-33-44-55-66
B. 32768: 22-33-44-55-66-77
C. 32769: 11-22-33-44-55-65
D. 32769: 22-33-44-55-66-78
Answer: A
Section: Chapter 9: Switching
Explanation/Reference:
QUESTION 87
A switch is configured with all ports assigned to vlan 2 with full duplex FastEthernet to segment existing departmental traffic. What is the effect of adding switch ports to a new VLAN on the switch?
A. More collision domains will be created.
B. IP address utilization will be more efficient.
C. More bandwidth will be required than was needed previously. D. An additional broadcast domain will be created.
Answer: D
Section: Chapter 10: VLAN
Explanation/Reference:
QUESTION 88
Which two statements about the use of VLANs to segment a network are true? (Choose two.)
A. VLANs increase the size of collision domains.
B. VLANs allow logical grouping of users by function. C. VLANs simplify switch administration.
D. VLANs enhance network security.
Answer: BD
Section: Chapter 10: VLAN
Explanation/Reference:
QUESTION 89
On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to
communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?
A. a router with subinterfaces configured on the physical interface that is connected to the switch
B. a router with an IP address on the physical interface connected to the switch
C. a switch with an access link that is configured between the switches
D. a switch with a trunk link that is configured between the switches
Answer: A
Section: Chapter 10: VLAN
Explanation/Reference:
0 Response to "10"
Post a Comment